Table of Contents
What is a high Janka rating?
The highest rating on the scale is a 4000, making for an extremely hardwood, also not likely suitable for flooring because it would be so difficult to saw.
Is 1360 a good Janka rating?
Red Oak is considered the industry median for flooring hardness with a Janka rating of 1260. If you are looking for extra durability, consider Red Oak or a species that ranks higher on the Janka scale. Readily available and popular species include White Oak (1360), Hard Maple (1450), and Hickory (1820).
What is a good Janka rating for dogs?
If you are looking for flooring on the domestic front, hard maple is a top choice. Hard maple has long been used as a surface for basketball courts, so it’ll stand up well to pet traffic. Hard maple hits a Janka rating of 1,450 or higher (anything over 1,000 is considered excellent for flooring).
What is the hardness rating of oak?
JANKA HARDNESS SCALE
|WOOD SPECIES (Hardest to Softest)
|Northern Red Oak
What is the Janka rating of hardwood?
A Janka rating is a rating largely used by the timber flooring industry to compare the hardness of a floor. Technically, the test involves pushing an 11.18mm diameter steel ball into wood fibre until it reaches half of the diameter of the ball. The force used is then measured in kN (kilonewton) as the Janka rating.
How is Janka measured?
The Janka Test is a measure of the hardness of wood. The Janka Test was developed as a variation of the Brinell hardness test. The test measures the force required to push a steel ball with a diameter of 11.28 millimeters (0.444 inches) into the wood to a depth of half the ball’s diameter.
What is the Janka rating for maple?
1450 out of 4000
With a Janka Hardness rating of 1450 out of 4000, the Sugar Maple wood species falls within the medium range of hardwood flooring options. The Janka Hardness scale is used to determine a hardwood’s resistance to dents, dings, and scratches.
How hard is oak on the Janka scale?
Red oak is used as the standard and its hardness is 1,290 on the Janka scale. White oak is just a bit harder at 1,360.
What is the Janka rating of 1820?
Typical Janka hardness values
|Force: pounds-force (newtons)
|1,860 lbf (8,300 N)
|Goncalo Alves, Tigerwood
|1,850 lbf (8,200 N)
|Hickory, Pecan, Satinwood
|1,820 lbf (8,100 N)
|Afzelia, Doussie, Australian Wormy Chestnut
|1,810 lbf (8,100 N)
What is Maple Janka rating?
With a Janka Hardness rating of 1450 out of 4000, the Sugar Maple wood species falls within the medium range of hardwood flooring options.
What is the Janka rating of maple?
What is a Janka rating and how important is it?
The Janka rating scale is one of the most utilized and important scales when it comes to hardwood flooring. It describes how hard the flooring is. The harder the floor, the more durable it is. The Janka rating scale was created to rank the various degrees of hardness throughout the different species of hardwoods.
What does the Janka hardness number mean?
The Janka hardness scale is a well-known rating system that determines the hardness of each wood species and how they relate to one another. The higher the number on the scale, the harder and more scratch resistant the wood is. However, the harder a wood is, the more difficult it becomes to saw or run through a mill.
What is the Janka Hardness Scale for hardwood flooring?
The Janka Hardness Scale The Janka hardness scale, used to determine whether or not a wood species is suitable for flooring, is the primary test measuring wood’s resistance to wear and dentability. How does the test work? The Janka test measures the force required to embed an 11.28mm steel ball halfway into a piece of wood.
What is the Janka hardwood flooring test?
The Janka Hardness Test Named after its inventor, Gabriel Janka, the Janka Hardness Test is a way to determine how durable a species of wood is. This, in turn, allows manufacturers to decide which types of wood are suitable for hardwood flooring. While the test is not something you can perform on your own, it’s simple to comprehend.