Can front tires be smaller than back tires?

Can front tires be smaller than back tires?

Long story short: Yes, it is a problem to have two tires of different sizes on the front (or back) of your car. Having two different-sized tires on the same axle is generally not a good thing. Sometimes, people choose to put larger tires on the rear axle of their vehicle for handling reasons, cosmetic reasons, etc.

What happens if you have two different size tires?

If you continually use mismatched tires and wheels they will wear out unevenly and can cause problems later down the road. If you choose to drive your vehicle with mismatched wheels the same issues can result. Mismatched wheels will fit each tire differently causing uneven wear and tear.

Can you have different size tyres on front and back?

Can you have different size tyres front and back? Generally, in a front or rear-wheel drive, as long as you have ensured both pairs of tyres are the same, you can have different size tyres between rear and front if the suspension geometry is set to accommodate for this.

What happens if one tire is smaller than the others?

A: The mismatched tire is a dangerous situation. It should be replaced with the proper size immediately. Mis-sized rear tires can lead to a loss of control under hard braking (the car can spin). The one tire left on the car is almost an inch smaller in diameter.

Are front and rear tires the same?

For optimal safety and performance, it is recommended that vehicles are fitted with the same tires to every wheel position on your car. That means having the same brand, size, tread pattern, load index, and speed rating on the front and rear tires. However, there are exceptions that can lead to mixing tire brands.

What happens if you put a different size tire on your car?

Changing to larger tires with an improper sidewall height can cause damage to your vehicle’s suspension system, wheels, and the tires themselves, and can run the risk of incorrect speedometer readings.

What does 60 R mean on a tire?

60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60\% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.