Table of Contents
What topology is connected to a switch?
In a star topology, each network node is connected to a central device called a hub or a switch. Star topologies are also commonly used with LANs.
Which topology uses a switch or hub to connect to all devices in the same network?
Star topology
Star topology has become the dominant physical topology for LANs. The star was first popularized by ARCNET, and later adopted by Ethernet. Each node is connected directly to a central device such as a hub or a switch, as shown in Figure 5.17.
In which network topology is each node connected to the next by a direct line so that a continuous line is formed?
mesh topology
In a mesh topology, each device is connected directly to every other device on the network.
What is hub topology?
In network science, a hub is a node with a number of links that greatly exceeds the average. The uprise of hubs in scale-free networks is associated with power-law distribution. Hubs have a significant impact on the network topology. Hubs can be found in many real networks, such as the brain or the Internet.
Does bus topology use a switch?
The logical topology for the switch network is a star because, unlike a hub, a switch does not repeat the signal out every port, but just to the appropriate device….Physical Star Logical Ring.
| Term | Definition |
|---|---|
| Bus | This is a linear topology, with all devices connected to the cable. |
What is a star bus topology?
Star Bus is a networking topology in which hubs for workgroups or departmental local area networks (LANs) are connected by using a network bus to form a single network. Star bus topology is a combination of star topology superimposed on a backbone bus topology. Crossover cables for regular (host) ports on the hub.
What is star ring topology?
Star/Ring. In the star/ring topology, the computers are connected to a central component as in a star network. However, these components are wired in the form of a ring network. This allows a higher network traffic between segments than with the star/bus topology.
Which topology has multipoint connection?
BUS Topology
Multipoint connection is used in BUS Topology. All the devices are connected to a single transmission medium, which acts as the Backbone of the connection. This links all the devices in the network.
Which type of network topology connects multiple devices?
The mesh topology connects all devices to each other. When every device is connected to every other device, a failure of any cable or device along a connection does not affect the network. The mesh topology is used in WANs that interconnect LANs.
In which topology all the nodes are connected to each other?
A mesh topology is defined by overlapping connections between nodes. You can create a full mesh topology, where every node in the network is connected to every other node.
How many topology are there?
There are five types of topology – Mesh, Star, Bus, Ring and Hybrid.