Table of Contents
What resistor do I need to drop 18V to 12V?
1 Answer. The problem with using a resistor is that its voltage drop varies depending on how much current the motor draws. At 60mA you would need (18V-12V)/0.06A = 100Ω, but at 300mA you would need (18V-12V)/0.3A = 20Ω.
Can you run 12V off 18V battery?
18V would be risky, I would not try to plug a 12V device into an 18V battery. But if you happen to have 18V for whatever reason, you can always use a DC-DC converter.
How do I drop 20v to 12V?
You can drop down the voltage by use of 7812 regulators or by Zener diode voltage regulator. You can use a resistance in series with 20-volt source to drop down the voltage to 12 volts. You can drop down the voltage by use of 7812 regulators or by Zener diode voltage regulator.
Can you reduce 24v to 12V?
When using a 24v on 12v appliances, you will need to use a DC-DC converter. This converter helps to drop the voltage from 24v to 12v. A DC to DC converter is an electronic device used to regulate voltage from a source. In most instances, they help to regulate the output voltage.
Can I run a 12V pump on 18v?
No. You are applying too much voltage to the motor. This will cause too much current to flow, and in turn, burn out the motor. If it is rated for 12 volts, it should get at the most 10\% more or 13.2 volts.
Can you charge 18v with 12V?
Theoretically, you can charge your car battery with a 12V power supply. For a car battery to be good enough for use, it will need to read at least 13.8V. So if you are charging it with a 12V power supply, you can only get as much as 12V in the battery. It won’t charge it higher than 12V.
How is DC voltage drop?
To reduce voltage in half, we simply form a voltage divider circuit between 2 resistors of equal value (for example, 2 10KΩ) resistors. To divide voltage in half, all you must do is place any 2 resistors of equal value in series and then place a jumper wire in between the resistors.
How do you lower voltage?