Table of Contents
What is the difference between axial and transverse?
A transverse (also known as axial or horizontal) plane is parallel to the ground; in humans it separates the superior from the inferior, or put another way, the head from the feet. A sagittal (also known as anteroposterior) plane is perpendicular to the ground, separating left from right.
What is transverse loading?
Transverse loading is a load applied vertically to the plane of the longitudinal axis of a configuration, such as a wind load. It causes the material to bend and rebound from its original position, with inner tensile and compressive straining associated with the change in curvature of the material.
What is transverse loading of beam?
Transverse loading of a beam refers to loads that are applied perpendicular to the planar surface of the beam.
What is the difference between axial and radial load?
Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).
What is the difference between axial and lateral?
Axial – along the center of a round body, or the axis of rotation of a body. Lateral – spanning the width of a body.
What is axial load in civil engineering?
An axial loading is a force directed over the line of axis. If the object is loaded with force, the axial loads act along the object’s axis. Alternatively, the axial force is seen as passing through the neutral axis of a considered section, which is normal to the plane of the section.
What is axial load in beam?
Axial loading is defined as applying a force on a structure directly along an axis of the structure. As an example, we start with a one-dimensional (1D) truss member formed by points P1 and P2, with an initial length of L (Fig. 1.2) and a deformed length of L′, after axial loading is applied.