What is the difference between AND gate or gate?

What is the difference between AND gate or gate?

What is the difference between AND gate and OR gate? 1. AND gate gives a ‘true’ output only when both inputs are ‘true’, whereas OR gate gives an output of ‘true’ if at least one of the inputs is ‘true’. AND gate implements logical conjunction and OR gate implements logical disjunction.

Are logic gates switches?

Logic gates are primarily implemented using diodes or transistors acting as electronic switches, but can also be constructed using vacuum tubes, electromagnetic relays (relay logic), fluidic logic, pneumatic logic, optics, molecules, or even mechanical elements.

What are the functions of switch?

A switch is defined as a device that is used for making and breaking of electric current in a circuit. It is used to turn on and turn off daily used equipment like television, washing machine, fan, light, etc.

What is a logic switch?

[′läj·ik ‚swich] (electronics) A diode matrix or other switching arrangement that is capable of directing an input signal to one of several outputs.

What is the difference between a switch and a gateway?

In other words, switch divides collision domain of hosts. 2. Gateway : Gateway is a passage to connect two networks together that may work upon different networking models. It basically works as the messenger agents between systems that takes data from one system, interprets it and transmits it to the other system.

What is switch Switch?

Switch is a network device which is used to enable the connection establishment and connection termination on the basis of need. Switch is operated on Data link layer. In this packet filtering is available. It is type of full duplex transmission mode and it is also called efficient bridge.

What is the difference between a hub and a switch?

1. Hub is operated on Physical layer. While switch is operated on Data link layer. 2. Hub is a broadcast type transmission. While switch is a Unicast, multicast and broadcast type transmission. 3. Hub have maximum 4 ports. While switch can have 24 to 28 ports.

What are the different types of switch in networking?

It is of two types: Active Hub, Passive Hub. Switch is a network device which is used to enable the connection establishment and connection termination on the basis of need. Switch is operated on Data link layer. In this packet filtering is available.