Table of Contents
- 1 What is basic difference between Lamont boiler & other boilers?
- 2 What is the main advantage of Lamont boiler?
- 3 What is a main disadvantage of Lamont boiler?
- 4 What is the major limitation of Lamont boiler?
- 5 What is the major limitation of the Lamont boiler Mcq?
- 6 How much steam does a LaMont boiler produce in an hour?
- 7 What is an external pump on a LaMont boiler?
What is basic difference between Lamont boiler & other boilers?
La Mont’s initial designs confirmed the lighter, safer and higher rates of heat transfer and evaporation per square foot as compared to that of the standard water tube boilers, also the circulation of vaporized water at a differential pressure of 2.5 bar was 8 to 10 times greater.
What is the main advantage of Lamont boiler?
Advantages of Lamont Boiler: It is easy to start its operation. The construction design of the Lamont boiler is very simple and easy to understand. This boiler can reassemble with the natural circulation boiler and. it has a high heat transfer rate.
How much of pressure Lamont boiler generate steam?
The Lamont boiler generates approximately 45 to 50 tons of superheated steam at temperature 500°C and pressures of 120 bar.
Which boiler is used for more pressure generation?
Additional Information
| Fire-Tube Boiler | Water-Tube Boiler |
|---|---|
| They are low-pressure boilers. The operating pressure is about 25 bar | They are high-pressure boilers and the operating pressure is about 250 bar |
What is a main disadvantage of Lamont boiler?
Explanation: The main disadvantage of Lamont boiler is the formation of bubbles. These bubbles come in contact with the inner surface of the heating tubes and subsequently are attached to it.
What is the major limitation of Lamont boiler?
The major disadvantages of the Lamont boiler are bubble formation at the surface of the tubes that reduces the transfer rate of heat and causes low steam generation.
What is Disadvantages of Lamont boiler?
The disadvantage of Lamont boiler is as follows. Bubble formation on a surface of the tube reduces the heat transfer rate. The design is not good, and also the fabrication is poor, that’s why we can see unnecessary leakage in this boiler.
What is the capacity of Lamont boiler?
Advantages of Lamont Boiler It transfers the heat at a higher rate. The Lamont boiler has a high steam generation capacity of about 50 tons/hour.
What is the major limitation of the Lamont boiler Mcq?
How much steam does a LaMont boiler produce in an hour?
This type of boiler can generate 650000 Pound (294840 Kg) superheated steam in an hour. Lamont Boiler also can be a fire tube boiler. Generated Steam pressure from Lamont Boiler can 127.75 kg/Square Cm and temperature can be 533 degrees Celsius.
What are the advantages and disadvantages of the LaMont boiler?
It can generate a high amount of steam and easy to start its operation. The construction design of the Lamont Boiler is very simple and easy to understand. This boiler can reassemble with the natural circulation boiler and it has a high heat transfer rate. After all this advantage it has one disadvantage.
How much pressure can a boiler generate in an hour?
Pump feed water supply pressure can be 35 Pound/Square Inch (2.45 KG/Square Cm). This type of boiler can generate 650000 Pound (294840 Kg) superheated steam in an hour. Lamont Boiler also can be a fire tube boiler. Generated Steam pressure from Lamont Boiler can 127.75 kg/Square Cm and temperature can be 533 degrees Celsius.
What is an external pump on a LaMont boiler?
Lamont Boiler is a water tube boiler that has an internally fired furnace, high pressure, forced water circulation system. As I say, a forced water circulation system and for this reason, an external pump is used to circulate the water system within the small diameter water tubes of this boiler.