Table of Contents
- 1 What happens if clutch free pedal play is excessive?
- 2 How much free play should be left on the clutch?
- 3 What is the result if there is no clutch pedal freeplay present in a clutch pedal?
- 4 Why clutch free play is important?
- 5 What is meant by clutch pedal free play?
- 6 How do you increase clutch on free play?
What happens if clutch free pedal play is excessive?
This will cause the pedal to have too much free play when depressed before resistance is encountered and will result in a clutch that doesn’t disengage properly or all the way. …
How much free play should be left on the clutch?
Most brake and clutch pedals should have just a little bit of free play, usually about a centimeter, which is less than half an inch. If you feel that your free play is more generous than this, or that you don’t have any at all, you’ll need to adjust your pedals.
What is the result if there is no clutch pedal freeplay present in a clutch pedal?
If there’s no free pedal play on your clutch pedal, another problem can occur, even if there’s enough play to allow the clutch disk to engage. In this case, the throwout bearing, which responds to pressure on the clutch pedal by causing the disk to disengage, may go on spinning.
How do you adjust the clutch lever on free play?
How to Adjust the Clutch Lever
- Pull back the rubber cover from the clutch lever, and loosen the larger lock nut by unscrewing it with your fingers.
- Screw the smaller “adjusting nut” outward to reduce free play and tighten the lever, or inward for the opposite effect.
What happens when there is no clutch?
A clutch simply pauses the transmission of power from the engine to the drive train, temporarily. When the clutch is disengaged(pressing the clutch pedal), there is no power transmitted to the drive train. Therefore the gears can be shifted smoothly without causing much noise, jerks and damages.
Why clutch free play is important?
Anything less than the correct amount of free play (or clearance) will result in clutch slip, because the pressure plate will be unable to exert its full pressure on the friction plate. Failure to cure this fault will quickly lead to a burned-out friction plate, and possibly a ruined pressure plate.
What is meant by clutch pedal free play?
“Freeplay” is the distance, usually measured in inches or fractions of an inch, that the clutch pedal can be depressed before it starts to “work,” or disengage the clutch. …
How do you increase clutch on free play?
Clutch
- To adjust the free play, loosen the lock nut. Turn the adjusting nut to obtain the specified free play. Tighten the lock nut and check the free play.
- Start the engine, press the clutch lever and shift into gear. Make sure the engine does not stall, and the motorcycle does not creep.