What does 53 mean on glasses?

What does 53 mean on glasses?

A first number is a two-digit number that is 53, which represents the eye size. It is the horizontal width of the lenses. Generally, the number of eye size varies from 40 mm to 62 mm in most of the spectacle frames.

What do the numbers on the bridge of my glasses mean?

The numbers beneath the frames reflect the SIZE MEASUREMENTS in millimeters (mm). THE FIRST NUMBER (ex.54) = the width of the lenses. THE SECOND NUMBER (ex.15) = the distance between the lenses. THE THIRD NUMBER (ex.140) = the length of the temple arm including the portion going behind the ear.

What are the 3 measurements on glasses?

The key measurements that describe eyeglass sizes are the eye size, bridge width and temple length. All three frame measurements are specified in millimeters (mm).

How do I know my bridge size for glasses?

Look in the mirror to see where your nose bridge starts and how wide or narrow your nose is. If your bridge is low (level or below your pupils), your bridge size will be a low number (between 16-18). If it is high (above your pupils) or if it is wider than average, you will need a larger bridge number (between 19-21).

What does temple length mean?

Temple length is the measurement in millimeters of the “arms” of the frame. This measurement does not vary as much as the others. 135mm, 140mm, 145mm, and 150mm are the most common options. The temple should fit horizontally and evenly along your face and fit comfortably along the outside of your ear.

What is Eye Bridge Temple?

Bridge Size – measurement is the distance in millimeters between the two lenses. It is measured between the two closest points of the two lenses. Temple Size – is measured along the length of the temple, from one end to the other, including the bend.

How do you read glasses measurements?

If you look on the inside of your glasses, you’ll find a number that looks like: 52 18 135. This information shows you the size of your glasses; the lens diameter, the bridge width and the side length, all measured in millimetres. 1: The lens diameter is the width of the lens (in mm), measured from the bridge.

What Is Temple length glasses?

TEMPLE LENGTH From the screw position measures to the end of the temple, including the bend. In other words, it’s the “arm length” of the frame. Temple length can fall between 120mm and 150mm with 135mm, 140mm, 145mm and 150mm being the most common.

What is the average temple length?

Temple length can fall between 120mm and 150mm with 135mm, 140mm, 145mm and 150mm being the most common. If you have problems with temples being too short, check out other frames as different brands varied in temple length, get those with lengths of 145 and 150mm.

How do you measure temple size for glasses?

THE TEMPLE ARMS Measure from the hinge—where the arm connects in the front— to the spot where the arm begins to bend down around the ear. Then measure from the top of the bend to the bottom tip. Add the two sections together for the total temple arm length.

What is Temple size glasses?

How is eyeglass temple size measured?

Eyeglass temple size is measured from the hinge of the frame to the end tip of the temple. In this case, the temple length is 140 mm. Temple lengths generally range from 120 to 150 mm. Often, a small square (rather than a dash) will separate the eye size and the bridge size on the frame.

What does bridge size mean on eyeglass frames?

The second number — the bridge size — is the distance between the lenses. In other words, it’s the size of the “bridge” of the frame that rests on your nose. In this case, the frame bridge is 19 mm wide. The bridge size of most eyeglass frames will be 14 to 24 mm.

What are the key measurements that describe eyeglass sizes?

The key measurements that describe eyeglass sizes are the eye size, bridge width and temple length.

What do the numbers on the inside of eyeglass frames mean?

These numbers describe the size of your eyeglass frames, specifically: Numbers that appear on the inside of eyeglass frames include the eye size, bridge width and temple length. The eye size. The bridge size (distance between the lenses)