Table of Contents
What are the components of a water pump?
Water Pump Components
- Hub or Pulley.
- Body.
- Bearing.
- Seal.
- Impeller.
What are the seven major parts of a water pump?
Article Summary & FAQs
- Impeller. An impeller is a rotor used to increase the kinetic energy of the flow.
- Casing (Volute). The casing contains the liquid and acts as a pressure containment vessel that directs the liquid flow in and out of the centrifugal pump.
- Shaft (Rotor).
- Shaft sealing.
- Bearings.
Which of the following is a main component of a centrifugal pump?
The impeller is the key component of a centrifugal pump. It consists of a series of curved vanes. These are normally sandwiched between two discs (an enclosed impeller).
What are the two main components of a submersible pump?
The submersible pump system consists of both downhole and surface components. The main surface components are transformers, motor controllers, junction box and wellhead. The main downhole components are the motor, seal, pump and cable.
Which of these are the components of pumping station?
A typical sewage pumping station has the following major components:
- Grit channel or Detritus pit.
- Coarse and fine screens.
- Sumps or Wet well.
- Dry Well or Pump room.
- Motor room.
- Inlet and Rising main to an outlet.
- Emergency overflow exit pipe.
What are the main parts of reciprocating pump?
The main components of reciprocating pump are as follows:
- Suction Pipe.
- Suction Valve.
- Delivery Pipe.
- Delivery Valve.
- Cylinder.
- Piston and Piston Rod.
- Crank and Connecting Rod.
- Strainer.
What is water pump casing made of?
The pump body, or casing, is the external case of a water pump. It’s what houses the impeller, the volute, and all the other internal parts. The pump body is most commonly made of cast iron, due to more economical manufacturing costs, but can also be made of stainless steel, bronze, plastic or other materials.
What material is used for pump impeller?
Cast iron
Cast iron has hitherto been the most extensively used material for the manufacture of pump impellers. Cast iron, however is notorious for its poor corrosion resistant property. Cast iron is a generic term that applies to high carbon-iron alloys containing silicon. These irons are extremely hard and brittle.
What is the difference between submersible pump and centrifugal pump?
A submersible pump is installed underwater whereas a centrifugal pump is installed on the ground. Therefore, submersible pumps are used for groundwater extraction through deep wells and centrifugal pumps are ideal for water supply and drainage applications in urban areas or for industrial purposes.
What is submersible water pump?
A submersible pump (or sub pump, electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between the pump and the fluid surface.
What are the main components of a power pump?
Pump components and seals. The main components in a pump are the casing, impeller, backing plate, shaft and shaft seal, and the motor adapter.
What are the different parts of a centrifugal pump?
It is also used to support some of the key parts such as shafts, bearings, etc. Impellers: An impeller is a rotating component in a centrifugal pump which is equipped with vanes or blades that rotate and moves the fluid in a pump. These vanes or blades are coupled to a shaft.
What are the mechanical and wet parts of a pump?
The mechanical end includes those parts that support the impeller within the casing, seal the casing where the shaft passes through it and enable rotation – the means by which the wet end creates flow and pressure. We’ve already talked about the two primary parts of a pump: the casing and impeller. So we won’t spend much time on those here.
What are the basic components of a solar water pump system?
Read on to learn more about the basic components of a solar water pump system. The solar panels used in our solar water pump systems produce electricity by using the photovoltaic effect. These solar panels absorb the sun’s photons and convert them into energy. This is the main component of a solar water pump system.