Table of Contents
- 1 Is drop ceiling better than drywall?
- 2 Is drop ceiling best for basement?
- 3 What ceiling is best for basement?
- 4 What is the cheapest way to finish a basement ceiling?
- 5 How much does it cost to drywall a basement ceiling?
- 6 How can I cover my basement ceiling for cheap?
- 7 What is required to sound proof a basement celling?
- 8 What is a drop ceiling made of?
Is drop ceiling better than drywall?
When it comes down to choosing between dropped ceiling and drywall, it often comes down to aesthetics and ease of access. Dropped ceilings are an excellent option for areas where you need to easily reach wiring, plumbing, or HVAC systems, like finished basements or garages.
Is drop ceiling best for basement?
Many homeowners prefer to have a drop ceiling in their basement because plumping and wiring is typically installed in the space above and getting to it is easy. It is simple to replace damaged ceiling tiles but it may not be so easy to fix up damage done to a sheetrock ceiling.
Should you drywall your basement ceiling?
Aside from these 6 items, everything else in the basement ceiling is considered a non-accessible item, and therefore can and should be covered by a drywall ceiling (in my opinion). All of the other electrical wiring, water lines, sewage drainage lines, insulation, floor joists, duct-work, etc.
What’s more expensive drop ceiling or drywall?
A drop ceiling costs about the same if not more than a drywall ceiling.
What ceiling is best for basement?
Suspended ceilings are one of the most popular basement ceilings. Consisting of a simple grid and lightweight tiles or panels, a suspended ceiling covers exposed beams, ductwork, and electrical wiring, while allowing easy access for repairs or leaks.
What is the cheapest way to finish a basement ceiling?
Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.
What is the best type of ceiling for a basement?
Are drop ceilings expensive?
Is it cheaper to drywall or drop ceiling? At $5 to $28 per square foot, drop ceilings are more expensive to install than drywall. Installing drywall costs $1 to $3 per square foot but that does not include painting prices, which are $2 to $6 for each square foot.
How much does it cost to drywall a basement ceiling?
Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.
How can I cover my basement ceiling for cheap?
What is the best insulation for a basement ceiling?
Best Insulation for a Basement Ceiling. The best tip to keep in mind when it comes to basement insulation is moisture control. To this end, a material such as closed-cell spray foam, which helps provide a water vapor barrier.
How do I mount a ceiling fan to a drop ceiling?
Wire the base of the ceiling fan to the fan gang box. Drop a plumb line down from the center of the mount, and measure it’s position as it crosses the level of the suspended ceiling grid.
What is required to sound proof a basement celling?
Material Needed To Soundproof an Unfinished Basement Ceiling Two Layers of Drywall. One way to save you tones of money is to have two layers of 5/8″ drywall coupled with a layer of Green Glue Acoustic Compound Drywall Plus Insulation. To add some extra soundproofing to your basement ceiling, you will need to add the two layers of drywall with the Green Glue in between and Acoustic Tiles.
What is a drop ceiling made of?
Dropped ceilings are constructed by suspending panels or tiles on a metal grid. The grid is partially supported by moulding attached to the walls, but most of the weight of the panels or tiles is taken by metal wires that are strung from the ceiling. This grid is normally built from the middle of the room out.