Table of Contents
How many gallons per minute does a 1/2 HP well pump?
A two-line jet pump can typically raise water from depths of 30-feet to 80-feet, and at water delivery rates of 4 gpm (gallons per minute) (for a 1/2 hp 2-line jet pump serving an 80 foot deep well) to 16 gpm (for a 1 hp 2-line jet pump serving a 30 foot deep well).
How many amps does a half horse well pump pull?
When delivering 1/2hp to the pump, it draws 5.0 Amps. If that motor operates at its service factor of 0.8, it will draw 6.0 Amps. Most installations have motors near the maximum load.
What size breaker do I need for a well pump?
Most submersible well pumps are 230 volts and require a 2 pole circuit breaker (2 individual circuit breakers connected together).
What size breaker do I need for a 1 HP well pump?
So, the horsepower of the pump is the factor. For example, ½ HP pump needs a 15 amp breaker. But the ideal circuit breaker will be 25 amps for a 1 HP pump.
How many amps should a well pump pull?
A 240 volt, 1 horsepower well pump draws 10 amps of current. When the pump starts, it can draw up to 35 amps, but only for 5–10 seconds.
How many amps is a 1 HP well pump?
10 amps
A 240 volt, 1 horsepower well pump draws 10 amps of current. When the pump starts, it can draw up to 35 amps, but only for 5–10 seconds.
What size breaker do I need for a 2 hp motor?
How to Calculate How What Size Circuit Breaker a Machine will Need:
| HorsePower of Main Motor | 220 Volts, 1 phase | 220 Volts, 3 phase |
|---|---|---|
| 1 Hp | 5.6 Amps | 2.8 |
| 2 | 11.2 | 5.6 |
| 3 | 16.8 | 8.4 |
| 4 | 22.4 | 11.2 |
What size breaker should I use for a pool pump?
One is so you can know what size breaker is needed at the electric box and the other so you know what size of wire to run to the pool’s pump. A typical above ground pool pump will require a 20-amp breaker and use #12 gauge wire to deliver the electricity.
What is the average life of a submersible well pump?
When you have a submersible pump installed below ground in an area that is difficult to access, the last thing you want is an inferior product that will break down. In the United States, the average life span of a submersible well pump is about 10 years.
What are the common sizes of circuit breakers?
Standard circuit breakers are either single- or double-pole . Are the most common breakers used in homes. Protect one energized wire. Supply 120V to a circuit. Handle 15- to 30-amps. Available in three types: Full size (1-inch wide), half size (1/2-inch wide) and twin/ tandem (1-inch wide with two switches and controls two circuits).
What size breaker should be used for a stove?
The suggested circuit breaker size for the kitchen stove is 50 amps, 220 volts. This is a double breaker. Single breakers normally carry 110 volts. It must be a dedicated circuit for the stove only, meaning that no other appliances or outlets can be served by that circuit.