Table of Contents
How does a catch basin work?
A catch basin has a grate on top and a drainage pipe that slopes away from the basin. Water and solids enter the box through the grate. Solids settle to the bottom while water drains out of the pipe. This pipe typically connects to the larger local plumbing system and directs the water to a sewage plant or stream.
What is the difference between a storm drain and a catch basin?
In short, Catch Basins are holes in the ground that “catch” the rainfall or any runoff surface water. Storm Drains are a type of Catch Basin, but are typically along the sides of roads to deal exclusively with storm runoff. Storm Sewers are the systems that carry the water away.
What is a catch basin drain used for?
A: A catch basin or storm drain is a curbside drain with the sole function of collecting rainwater from our properties and streets and transporting it to local waterways through a system of underground piping, culverts and/or drainage ditches.
What is catch basin in plumbing?
1 : a cistern located at the point where a street gutter discharges into a sewer and designed to catch and retain matter that would not pass readily through the sewer. 2 : a reservoir or well into which surface water may drain off.
What is the difference between a dry well and a catch basin?
A catch basin drain differs from a dry well in that it is fully enclosed. Water doesn’t drain out the bottom into the soil but exits via a pipe connecting to a storm sewer or other approved drainage area. Catch basins have grates on top to prevent them from collecting too much debris.
What is a catch basin in Chicago?
Catch Basins Pumped & Cleaned In Chicago A catch basin or storm drain is a drain that collects rainwater from our homes, buildings and streets and sends it to our local waterways through a system of underground piping, and drainage systems. Storm drains are commonly found in parking lots.
How big should a catch basin be?
Standard sizes ranging from 1.5′ x 4′ up to 5′ x 5′ in various section heights. Catch basin riser sections are available from 6” to 60” height depending on catch basin size.
How much is a catch basin?
2′ x 4′ (ID) Catch Basins
| HEIGHT | PRICE | APPROX WEIGHT |
|---|---|---|
| 30″ | $246.00 | 2100 lbs |
| 36″ | $290.00 | 2300 lbs |
| 42″ | $304.00 | 3000 lbs |
| 48″ | $315.00 | 3400 lbs |
What does a drywell do?
A dry well is a well that is used to transmit surface water underground and is deeper than its width at the surface (see image, below). Most dry wells are 30 to 70 feet deep and 3 feet wide at the surface. They are lined with perforated casings and can be filled with gravel or rock or left empty.