How do you prevent table saw injuries?
The first step in avoiding table saw accidents begins with the rule: always protect your eyes. Most table saws work well with dust extractors. There’s still a chance an errant wood chip will get rifled back at your eyeballs. Throw on those safety glasses just in case.
When ripping on a table saw how do you avoid kickback or ejection?
Feed the stock with your right hand, keeping your right arm in line with the board. Stand clear of the ejection zone—the area between the fence and blade. With a splitter behind the blade, kickback is less likely to occur because the workpiece can’t easily contact the back teeth of the blade. 3.
What safety feature should be connected to the table saw to prevent kickback?
The anti-kickback pawls on a table saw is attached to the splitter to assist with any kickback. They can also be used with a riving knife. They’re attached either side of the splitter, and use claws to grab onto material to prevent kickback.
What causes saw kickback?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood. Make sure you’re using sharp blades and never force the saw through the cut.
What is a kickback on a table saw?
Kickback is the term for wood that suddenly and without warning is propelled back towards the operator at a high rate of speed. As wood is set against the fence and pushed across the table saw into the blade, it can begin to lose pressure against the fence.
What is kickback on table saw?
How common are table saw accidents?
Over 30,000 table saw injuries occur annually. Fingers and hands are the most frequently injured body part and lacerations are the most common injury. Medical costs for the treatment of table saw injuries are estimated at more than $2 billion every year.