How do I set the time on an armitron pro sport watch?

Posted on by Author

How do I set the time on an armitron pro sport watch?

How to Set the Time on an Armitron Pro Sport Watch

  1. Identify Watch Buttons. There are four buttons on your watch.
  2. Hold the Reset Button. To begin setting the time, hold the “Reset” button (A) until you hear a beep.
  3. Press the Mode Button.
  4. Use ST/STP to Adjust the Hour.
  5. Use ST/STP to Adjust the Minutes.

How do I reset the time on my watch?

To set the time and date on your digital watch, press the “Mode” button repeatedly to access the “Time and Date” display. Press the button multiple times until the “Time” digits begin to flash, noting that on some models you need to hold the button down to access this feature.

How do you set the time on a wrist watch?

How to Set a Watch the Right Way:

  1. Pull the crown out to its second position (unscrewing it first, if necessary) to set the time.
  2. Then turn the hands clockwise to set the time — this is often (but not always) done by turning the crown towards yourself.
  3. Press the crown in to start the watch again.
READ:   What if Olympus Mons was on earth?

How do you set an armitron all sport watch?

Press and hold the “set” button, “A,” to set the time and date on your watch. This will cause the numbers on the face of the watch to flash. Press the “C” button to zero the number of seconds. Press “B” to advance the settings to hours and minutes.

How do I change my armitron watch from AM to PM?

The Mode button is usually found on the bottom right side of your Armitron watch. When you press the mode button, the section that’s flashing on your screen will change. This way, you can easily switch between changing the hour, minutes, day, and date. Keep pressing Mode until you reach the value you need to change.

How do I set the time on my touch screen watch?

Change the time on your watch

  1. If the screen is dim, tap it to wake up the watch.
  2. Swipe down from the top of the screen.
  3. Tap Settings . If you don’t find it right away, swipe left.
  4. Tap System Date & time. Choose your time settings.
READ:   How do you encourage employees to report near misses?

How do you set the time on a CKE watch?

BACK LIGHT – PRESS “A”

  1. BACK LIGHT – PRESS “A”
  2. • TIME SETTING:
  3. TO ADJUST HOUR, MINUTES, MONTH, DATE AND DAY:
  4. • FOR HOUR ADJUST- PRESS “B” KEY THREE TIMES.
  5. • FOR MINUTE ADJUST- PRESS “B” KEY THREE TIMES.
  6. • FOR MONTH ADJUST – PRESS “B” KEY THREE TIMES.
  7. • FOR DAY ADJUST- PRESS B KEY THREE TIMES.

How do I set the time and date on a sports watch?

Set the time and date of your sports watch. The “Set” or “A” key found on the watch will allow you to change the time and date when pressed. After entering the set mode, you need to press either “C” or “Mode” to enter the correct time and date.

How do I set the clock on my Armitron Pro Sport watch?

Change to the hours function by pressing Adjust, and then use Alarm to choose the hour. To finish setting the Armitron Pro Sport watch, set the date and week day by pressing Alarm and Adjust respectively. Press Mode to save.

READ:   How many types of speed breakers are there?

How do I set the alarm on a sports watch?

Activate the alarm. While in the alarm mode, set a daily, monthly or one time alarm. Enter the hour, minutes, month and date before pressing the “Set” or “A” key. To stop the alarm once it goes off, most sports watches request that you press any key.

How do I use the mode button on a sports watch?

A sports watch allows you to toggle through different modes. On Casio, Timex and Coleman watches, the mode button is located on the left lower side of the watch. Each push of the button causes the watch to enter a different mode: standard, alarm, chronograph and timer. Activate the alarm.