How do I reset my WD My Passport Ultra hard drive?

Posted on by Author

How do I reset my WD My Passport Ultra hard drive?

How to Reset a WD Drive

  1. Leave the drive turned on but unplug it from your computer.
  2. Turn around the drive and locate the “Reset” button on the back panel of the unit.
  3. Unbend the leg of a paperclip and insert it into the hole until you depress the reset button and the paperclip won’t go any further.
  4. Warning.

How do I reset my passport hard drive?

drive is not locked:

  1. Click Drive Erase On the Drive Settings screen (see Figure 17 or Figure 18 on. page 27) to display the Erase Drive dialog:
  2. Read the warning about the loss of data if you erase your drive.
  3. Click the I understand check box to signify that you accept the risk.
  4. Click Drive Erase to erase your drive.
READ:   Why is BvS bad?

How do I fix my WD external hard drive not recognized?

Fix WD external hard drive not recognized error

  1. Go to Setting > Update & security.
  2. Tab on Recovery > Advanced Startup > Restart now.
  3. PC will automatically boot into another Startup Settings screen.
  4. Press F4 to initiate PC reboot into Safe Mode.
  5. Then check whether the WD external hard disk can be detected or not.

How do I fix my external hard drive that won’t read?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
  2. Try Another USB Port (or Another PC)
  3. Update Your Drivers.
  4. Enable and Format the Drive in Disk Management.
  5. Clean the Disk and Start From Scratch.
  6. Remove and Test the Bare Drive.

Why does my laptop not recognize my WD Passport?

If the WD Passport drive shows up, it is the damaged USB hub that stops WD from showing up. If the WD passport is not detected either on your current or the new PC, replace the WD drive with a new one.

READ:   Why did the D-Day invasion take so long to plan?

How do I get my computer to recognize my WD external hard drive?

Locate and right-click on your WD drive and click Change Drive Letter and Paths…. Click Change. Then select from the drop-down menu to assign a letter and click OK. Restart your computer and check if your WD external hard drive not recognized problem has been solved.

How do I format a WD hard drive for Mac?

How to format the WD element on your Mac device?

  1. Connect the WD elemental hard disk to your Mac powered device.
  2. Go to the disk utility option.
  3. Choose the hard drive you want to format.
  4. Select the format options.
  5. Erase the drive.