Table of Contents
How do I reset my HDMI settings?
Follow these steps:
- Unplug all TV/monitor from the HDMI ports.
- Unplug the power cable from the TV or monitor for about 10 minutes.
- Plug the power cable back in the TV or monitor.
- Plug one device to one HDMI port of your PC.
- Turn on the device.
- Repeat steps 4-5 for each device and HDMI port.
Why is my HDMI port not working on my TV?
Disconnect and reconnect the HDMI cable Disconnect the HDMI cable from the HDMI Input terminal on the TV. Turn on the TV and connected device again to let them recognise each other. If the issue continues, repeat the process but try a different HDMI input on your TV to see if this improves the situation.
How do I enable HDMI ports on my TV?
About This Article
- Locate the HDMI port on the TV.
- Acquire a cable that fits the ports on both devices.
- Connect the cable from one device’s HDMI port to the other.
- Use the Source or Input button on the TV to switch to the port.
- Configure video and audio on the device if needed.
What causes HDMI ports to go bad?
You may have inadvertently switched inputs or reconnected a device to the wrong port. You can scroll through your input options to try another HDMI or component connection to make sure you have the right one selected. Additionally, if your television has been moved or bumped recently, a port may have become damaged.
How do I reset my HDMI port on my LG TV?
Each device is different, follow the steps below for the standard procedure for resetting:
- Power down the connected devices to your television.
- Remove the HDMI cables.
- Turn off your TV.
- Unplug the power cable.
- Press and hold the television’s power button for thirty seconds.
- Reconnect the cables.
How can I tell if my HDMI port is bad?
How to Test an HDMI Port
- Spray some compressed air into the HDMI port of the display device.
- Turn on the display device and set it to the HDMI input mode.
- Turn on your source device and set it to export the image using the HDMI cable.