How do I fix my LG washer not draining?

Posted on by Author

How do I fix my LG washer not draining?

Clean the pump filter and filter opening with a soft-bristled brush and warm water. Place the cap back into the drain hose and reattach the hose to the washer. Insert the drain pump filter back into the washing machine, making sure it is inserted securely. Close the drain pump filter cover.

How do I force my LG top load washer to drain?

Force drain the unit by starting a cycle and pausing it. After 8 minutes the unit will automatically time out, display DR, and try to drain the unit. Press START/PAUSE button to START the cycle. Allow a few minutes to pass so the cycle begins.

How do you fix a washing machine that will not drain?

READ:   Is smoking or obesity worse for health?

What to Do When Your Washing Machine Won’t Drain

  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

What causes the washing machine to not drain water?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

How do I test my LG washing machine drain pump?

Test the drain pump.

  1. Press POWER to turn the washer ON.
  2. Press the SPIN SPEED key until HIGH is selected.
  3. Press the START/PAUSE button to start the SPIN ONLY cycle.
  4. Listen to hear a humming sound which indicates that the drain pump motor has started working.
READ:   How do I stop caring about friends so much?

How do I fix my LG OE error?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

How do I drain the water from my LG washing machine manually?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

Why does my washer sound like it has water in it?

If you hear a sloshing sound when you move the inner tub in your washer, that is the balance ring. The balance ring is an enclosed plastic container that is partially filled with a salt water solution. The two halves of the balance ring are welded together to form a permanent seal.

READ:   Is pharmaceutical advertising ethical?

How do I know if my drain pump is working?

Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.

How do I know if my drain pump is bad?

Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying. For front-loading washers, do not attempt to open the door mid-cycle.

https://www.youtube.com/watch?v=5rNe2yI8cSA