Table of Contents
How do I figure out how much metal roofing I need?
Divide the length of your roof by the width of the metal. In our example we will use 24-inch standing seam roofing, so we will divide 360 inches by 24, which equals 15. This is the number of metal panels needed for one side of the roof.
How do I figure out how many roofing sheets I need?
You divide Length with roofing clear span = number of sheets.
How do you figure square footage of a metal roof?
Multiply the length of the roof by the width to establish the surface area in square feet. For example, if the length is 21 feet and the width is 10 feet, the surface area is 210 square feet — 21 times 10 equals 210. Determine the width and length of the metal sheets to be used.
How much is a metal roof on a 1700 square foot house?
These metal panels cost between $1 and $2.50 per square foot for the raw materials, or between $5.50 and $11.50 for materials plus installation costs. For a 1,700-square-foot roof, the total metal roofing cost comes out to about $9,350 to $19,500.
How many inches do you overlap metal roofing?
Install Metal Panels Align the first metal roofing panel so that it overlaps the edging by 1/2 to 3/4 of an inch and is square to the roof line. Be sure the larger edge is laid so that the small edge of the next panel will overlap it.
How much should a corrugated roof overlap?
The upper sheet should overlap the first by 6 inches. Fasten the sheet and complete the second row in the same manner as the first. Each sheet should overlap both the sheet below it and the sheet to the side.
Is a drip edge necessary on a metal roof?
A drip edge is not needed for metal roofing. If you make sure to overhang your metal roofing at least an inch, the drip edge is not necessary at the eaves and rakes. If the metal roof is hanging over an inch, the water will be directed away from the fascia anyway if at a slant.
How much does a metal roof add to the value of your home?
Depending on your specific area, a metal roof will typically add 1\% to 6\% to your home’s resale value. The highest home appreciation gains for metal roofing upgrades occur along the east coast states.
How much does it cost to install a steel roof?
Installing a metal roof costs between $15,000 and $25,000, with most people paying around $18,000 to install a new 1,500 square foot standing seam stainless steel roof . Typically, the labor costs make up 60\% of the total cost , $9,000 to $15,000. The materials make up the remaining 40\%, $6,000 to $10,000.
What is the cheapest metal roofing material?
Bare in mind also, that tin is the cheapest of all metal roofing materials, ranging from only $600 – $1300 per square, including installation costs.
What is the best material for metal roofing?
Steel — Steel is the most common metal roofing material. It’s sturdy, and experts have spent a lot of time determining the best ways to protect it from rust. Manufactures generally use a zinc coating, a sealant and some heavy-duty paint to protect the material from the elements.