How do I enable features on my Nexus switch?

Posted on by Author

How do I enable features on my Nexus switch?

To use a feature, install it with the install feature-set command. Then, enable it with the feature-set command. Feature-sets are installed per VDC (on platforms that support VDC’s).

How do you enable NX API on a Nexus switch?

To enable NXAPI, we need to execute “feature nxapi” from config prompt. NXAPI also provides a sandbox environment which can be accessed using http from the management ip address. With the sandbox environment, we can execute NXOS CLI commands and get output in JSON or XML format.

How do I configure Nexus switch?

Power up the new Nexus switch and connect to the console port using a serial cable. The switch will take several minutes to boot. The initial configuration wizard starts automatically. Use the information you worked out with your team or with the customer to complete the wizard.

What is the equivalent NX OS command for the IP Multicast routing IOS command VDC?

READ:   How do you do a neutral facial expression?

What Is The Equivalent Nx-os Command For The “ip Multicast-routing” Ios Command, And Does The Nexus 7000 Support Pim-sparse Mode? The command is feature pim.

What is NX API?

The NX-API CLI is a web interface through which commands traditionally entered via the CLI, can be encoded using either XML or JSON, and transmitted via HTTP or a secure transport (HTTPS) to the device. The commands are executed on-box and responses are returned in either XML or JSON format.

How do I configure a switch?

How to Configure Cisco Switch: A Step-by-Step Guide with Commands

  1. Connect the Switch to PuTTY.
  2. Enter Privileged EXEC Mode and Set a Hostname for the Switch.
  3. Assign a Password to the Switch.
  4. Configure Telnet and Console Access Passwords.
  5. Configure IP Addresses With Telnet Access.

How do I create a vPC on Nexus?

Cisco Nexus vPC Configuration Example

  1. Step 1: Enable the vPC Feature and Configure the vPC Domain ID on Both Switches.
  2. Step 2: Choose a Peer Keepalive Deployment Option.
  3. Step 3: Establish the vPC Peer Keepalive Link.
  4. Step 4: Configure the vPC Peer-Link.
  5. Step 5: Configure Individual vPCs to Downstream Devices.

How many VDC can be configured in Nexus?

The maximum number of VDCs that can be configured per Nexus 7000 chassis is four; the default VDC (VDC 1) and three additional VDC(s).

What is IP PIM RP address?

ip pim rp-address Configures a static IP address of a rendezvous point for a multicast group range or adds new multicast range to existing RP. The no form of the command removes the rendezvous point for a multicast group range or removes all configuration of the RP. Syntax Description.

READ:   What are the homologous and analogous organs?

Which URL should you use to access NX API?

To access the NX-API, we send an HTTP GET or POST request to a well known URL, for example _http:// /ins_. We also need a way of passing actual data to the API – the NX-API expects to see input based on a simple XML string.

What opens NX?

NX Open is a collection of APIs that allows you to create custom applications for NX through an open architecture using well-known programming languages (C/C++, Visual Basic, C#, Java, and Python).

How do I find the IP of a switch port?

Perform a show mac address-table interface on the switch that has the device(s) connected to it. Then go to the router for the VLAN specified in the previous command and perform a show ip arp vlan | include . That will give you the IP address for the device.

How to enable multicast in Cisco Nexus 7000 series NX-OS?

A. The command is feature pim. In NX-OS, multicast is enabled only after enabling the PIM or PIM6 feature on each router and then enabling PIM or PIM6 sparse mode on each interface that you want to participate in multicast. See Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 5.x for a complete configuration guide.

READ:   Which berth is best in sleeper coach?

Does the Cisco Nexus 7000 series switches support FCoE?

A. The Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module support FCoE. The part number of the product is N7K-F132XP-15. Q. What is the minimum NX-OS release required to support FCoE in the Nexus 7000 Series Switches? A. FCoE is supported on Cisco Nexus 7000 Series systems running Cisco NX-OS Release 5.2 or later.

Is the honor-based license supported on Cisco Nexus 7000 series switches?

From Cisco NX-OS Release 8.4 (1), Grace period is not supported on Cisco Nexus 7000 Series switches. Supported, on Cisco NX-OS Release 8.2 (3) and earlier 8.x releases. From Cisco NX-OS Release 8.2 (4), Grace period is not supported on Cisco Nexus 7000 Series switches. 1 The following warning might display when installing the honor-based license.

What features can be enabled and disabled in Cisco NX-OS?

Cisco NX-OS software has the ability to enable and disable specific features, such as OSPF and PIM. By default, Cisco NX-OS software enables only those features that are required for initial networking connectivity.