How can I access my IP camera from anywhere?

Posted on by Author

How can I access my IP camera from anywhere?

How to view your IP camera remotely via a web browser

  1. Find your camera’s IP address.
  2. Open a web browser and type the IP address.
  3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
  4. After you change the port, you will need to reboot the camera in order to save the changes.

How do I find the external IP address of my IP camera?

The easiest way to find the security camera IP address is to check the Network page on the CCTV camera software (mobile app or PC client). The network page will display all the IP address information of your camera.

READ:   What are citations in local SEO?

How can I access my CCTV remotely without a static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port – By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

How do I connect my security camera to my router?

Plug an Ethernet cable (a.k.a. Cat 5 cable) into the Ethernet socket of the network camera, then plug the other end to the router (a.k.a. gateway or access point). If this network camera does not have Wi-Fi, this may be the only step needed for the network configuration. Find the IP address of the network camera.

How do I access my IP camera on my phone?

IP Cameras How to access from a Mobile device

  1. Open the internet browser of your smartphone.
  2. Type on the browser’s address bar the WAN IP address following with the assigned port separated by a colon.
  3. Type “admin” on the username.
  4. Here you will see the IP Camera web Client, with 3 options.
READ:   How do you use Moom?

How do I connect my camera to my network?

Use the network cable to connect to the camera and the router. PoE (Power over Ethernet) means you can just use a single network cable for both video and power transmission. So just connect the camera to the router via the network cable, and the camera will get power supply and network access.

How do I setup an IP camera on my network?

Network configuration

  1. Connect the network camera to your Local Area Network (LAN). A LAN is often the home network of a consumer.
  2. Find the IP address of the network camera. There are a few ways to do it.
  3. Fix the IP address (i.e. make the IP address static).
  4. Start using the Wi-Fi.
  5. Find the new IP again.