Can you mix different brands and speeds of RAM?

Can you mix different brands and speeds of RAM?

There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance.

Is it OK to mix Ram brands?

Can You Mix Different RAM Brands? In short, the answer to this question is: yes. No matter the brand, speed, and size of the RAM, you theoretically can get it to work on your system; though it may prove to be problematic. Also, depending on the setup & workload, you may not even notice a difference in performance.

Can you use RAM from different brands?

They can be different speeds, and made by different manufacturers. It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.

Can a PC have 12gb RAM?

Yes, you can. But if you have Dual Channel PC, it works a little bit slower. If you want maximum speed, you need a Single Channel PC. And also, you need same specs in both RAM which Bitsy Michael said.

Can you mix RAM brands DDR3?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers.

Can I use different brands of RAM with different speeds?

Some motherboards and specific OEMs might not function with RAM modules of different speeds and timing but they are pretty rare. Also you can mix brands with modules having the same timing and speed without much compatibility issues. Also ideally you should have similar modules on the same channel if you are using more than 2 sticks of RAM.

Can you mix RAM speeds?

In essence, you are doing a lot of work that you don’t need to do in order to do something that might not pay off in the end. You can mix RAM speeds, however. This is something that many people will do. You just have to be sure that you match all those important elements, including timings, voltage, and CAS latency.

Is it safe to mix different generations of RAM?

No. Don’t do it. Don’t even try. You cannot mix different generations of DRAM. In fact, you can’t install a different generation of DRAM in your system at all. The reason is that your motherboard is built to process one generation of memory.

Can you use different brand Ram sticks together?

Yes, you can use different brand RAM sticks together, even if they don’t have the same size. However, using mismatched RAM modules may negatively affect the performance and stability of your computer for the reasons we describe in detail in this article. How To Check RAM on Linux?