Can you install a toilet without a flange?

Can you install a toilet without a flange?

The flange and accompanying bolts hold the toilet firmly to the floor and keeps the seal between the toilet and the floor. Without the flange or if it is broken, he would have to attach the toilet to the subfloor with wood screws, and if the floor is rotting out, those won’t last long.

How much does it cost to replace toilet flange?

The cost for a plumber to replace the toilet flange varies by region and service provider, but the average price range is approximately $130 to $310.

How do you install an offset toilet flange on concrete?

Instructions

1. Cut off the Old Flange and Obstructions. After you remove the toilet, you will probably find an existing toilet flange.
2. Scrape off Old Wax Ring.
3. Pick the Correct New Toilet Flange.
4. Place T-Bolts in New Toilet Flange.
5. Position Toilet Flange.
6. Drill Holes Into Concrete.
7. Screw Toilet Flange Onto Concrete.

How do you cut a concrete toilet flange?

Use a heavy hammer and chisel and chip around the pipe enough to glue the flange to the outside of the pipe. Drill for the anchors to hold the ring of the flange down and you are all set to install the toilet. Re: Best way to clear concrete around toilet drain(PVC)?

How much does a plumber charge to replace a toilet flange?

How does a toilet flange break?

Many times an uneven floor and uneven setting of the toilet leads to rocking which then leads to a broken flange. The tendency is to either double up on the new wax ring or use flange spacers to beef up to proper height.

Can you put a new toilet flange over an old one?

Either slide the new closet flange bolts into the old flange before adding the extender or add them after you adhere the extender to the old flange. Consequently, we chose to add one of the bolts to the old flange first since it was a tight fit. Add metal washers and nuts to the closet flange bolts.

Can a toilet be properly installed without a flange?

2 Answers. The flange and accompanying bolts hold the toilet firmly to the floor and keeps the seal between the toilet and the floor. the or if it is broken, he would have to attach the toilet to the subfloor with wood screws, and if the floor is rotting out, those won’t last long.

How do you repair a toilet flange?

Hook the heads of the closet bolts to the underside of the repair plate, repair ring or push-in replacement and center them in the tracks. Place a new wax ring on the flange opening, replace the toilet and bolt it to the flange.

How to properly install a toilet flange?

Remove the toilet. The first thing you need to do is remove the toilet from the flange and pipe.

Clean and inspect the flange. Next,remove the wax ring on the flange with a scraper or knife.

Get a replacement flange. Next,measure the opening to make sure that you get the right flange size.

Install the new flange. Then,make sure that you place a rubber or wax seal on the flange and that it is sealed.

Secure the toilet. Now that the flange is installed,place a wax ring on the bottom of the toilet and slowly place it onto the flange.

Is the toilet flange installed correctly?

When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level . If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor. This is very important.