Can you ground a light to the junction box?
Adding a ground wire to the box isn’t difficult; just connect a six-inch section of bare copper wire to the box by driving a No. 10-32 ground screw into a threaded hole in the box. Pro tip: But before you do that, you have to make sure the box itself is grounded.
Do you have to connect ground wire for light fixture?
In fact, the ground wire is not necessary to complete the circuit; however, the ground wire acts as a safety net in the event of an electrical short. When a short occurs, the ground wire sends an almost instantaneous signal to turn off the breaker to stop the flow of electricity.
What if my ceiling light doesn’t have a ground wire?
If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture. Make sure to use wire nuts to attach the wires together.
Can 2 ground wires touch?
The reason that wiring devices have grounding connections that accept only one wire is that otherwise, if two ground wires were connected to the device, then if someone later removed that wiring device and then re-applied power without wire-nutting the grounding conductors, there would be a break in the ground path for …
How do you ground a light fixture in a plastic box?
Plastic boxes cannot be grounded in the same way. But it’s still necessary to bring the equipment-grounding conductor into the enclosure to ground devices such as switches and receptacles. Connect the bare or green wire directly to the green screw on the device.
What if there is no ground wire in the ceiling?
The ground wire doesn’t carry any electrical current (unless there is a problem in your electrical system). So if you wire your fan without the ground wire, it will still work properly. However, the added safety of the ground wire will not be present.