Table of Contents
Are RV breakers the same as home breakers?
In the typical home, both sides of such a dual breaker will be of the same value, but not necessarily so in an RV. You can often get a suitable replacement breaker for a single or double of the same value at the hardware store, but if you can’t find what you need, by all means, visit an RV supplier.
Are breaker boxes universal?
While some breakers are interchangeable, many are not, even if they look the same. Replacing one brand of breaker with another can be dangerous, may void your breaker or panel warranty, and may lead to a failed electrical inspection.
Can I put a bigger breaker in my RV?
You can upgrade your circuit breaker to a higher rating if the wiring is rated safe for 20 amps. A 20 amp circuit breaker must be wired with 12 gauge wire or larger. Otherwise, you may need fewer appliances using the circuit, or you may have a worn-out breaker that needs to be replaced with a breaker of the same size.
Can I use a 60 amp breaker in place of a 50 amp?
No, almost certainly not. The heat pump documentation specifies the breaker and conductor size, and that’s what must be used. Increasing the breaker size could lead to damage to the equipment and/or property, injury, death, and fire. If the breaker is tripping, it means there’s a problem with the equipment.
What type of breaker do I need for my RV?
What size breaker do I need for a 30 amp RV plug? A 30 amp Recreational Vehicle plug must actually be used with a 30 amp breaker. You could als plug it into a 15 or 20 amp breaker, but you run the risk of damaging your RV if you utilize more than the ranked power the circuit/outlet has been designed for.
What electrical breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter’s Laboratory (UL).
Can I put a 30 amp breaker in place of a 15 amp breaker?
NO! There is a reason why your 15 amp breaker keeps tripping, you are overloading the circuit. The wiring is not designed to handle 30 amps and you could create a possible fire hazard.
Can I replace a 60 amp breaker with a 70 amp breaker?
You will likely set the house on fire, or at least damage the insulation. So don’t swap out a lower ampere breaker for a higher one unless you know that the wiring can handle the load (both feed and load wiring for that matter.) This is an excellent way to start an electrical fire.
Can I replace a 30 amp breaker with a 60 amp breaker?
Whatever operating margin that second breaker would allow continued current to flow to the load overrating the 30A conductor on that half of the circuit. So do this right and install a 60A breaker and new wiring suitable for 60A circuit. The issue isn’t the breaker – that’s the easy part – it’s the wire.