Table of Contents
What is a horizontal split case pump?
Horizontal split case pumps are in-line pumps in which the pump housing is divided axially into two parts. The pumps are designed to work in a variety of applications, including public water supply, district cooling and HVAC systems. …
What is a horizontal pump?
A horizontal centrifugal pump will have its shaft placed horizontally, typically between the bearings or overhung. The design of the shaft is radial split and overhang. Deciding which pump to use in your operation may come down to several factors.
What is split pump?
What is a horizontal split case pump? A type of centrifugal pump, in which the casing is split into two separate chambers. It’s different from an end suction pump or inline pump, in which the casing, the suction nozzle, and the discharge nozzle are all included in a single chamber.
What is an inline pump?
What Is an Inline Pump? Inline pumps (otherwise referred to as straight-line pumps) are a variety of centrifugal pumps whose suction and discharge connections rest in a straight line of piping or are kept with each other inside of the casing. The flow of fluids does not change within an inline pump.
What is vertical split case pump?
Split Case Pumps are types of centrifugal pumps that have a single or double suction impeller supported between bearings. The Split Case Pump casing is split horizontally or vertically depending on the type of pump, for maintenance. Suction and discharge flanges are opposed to each other.
What are vertical pumps?
Vertical turbine pumps are centrifugal pumps specially designed to move water from an underground well or reservoir. They’re also known a deep well turbine pumps or a line shaft turbine pumps. Vertical turbine pumps work when water enters the pump through a bell-shaped part at the bottom called the suction bell.
Which type of pump is different from other?
Which type of the pump is different from others in the same group?…Discussion :: Hydraulic Machines – Section 2 (Q. No. 40)
| [A]. | Screw pump |
|---|---|
| [B]. | Gear pump |
| [C]. | Cam and piston pump |
| [D]. | Plunger pump |
What is horizontal end suction pump?
End-suction pumps are designed so that the incoming water enters the pump horizontally through the end. They are single-suction and can either be close-coupled or flexible-coupled. In a close-coupled pump, the impeller is directly mounted to the motor shaft.
What is inline centrifugal pump?
Vertical centrifugal pumps for low viscosity fluids Vertical inline centrifugal pumps, as their name implies, are single stage centrifugal pumps that are specifically designed for vertical installation. Their suction and delivery are inline to provide a smooth flow of liquid through the system.
What are the types of centrifugal pumps?
There are four main type classifications of centrifugal pump, with the chief distinction of each being the mechanism that drives the reciprocating diaphragm.
- Mechanically Actuated.
- Hydraulically Actuated.
- Solenoid.
- Air Operated Double Diaphragm Pumps (AODD)
How does a horizontal split case pump work?
Horizontal Split-Case Pump With a horizontal split-case pump, the flow is split and enters the impeller from opposite sides of the pump housing. As the name implies, this is a pump installed with a split casing that can be opened for pump maintenance access and is connected to the driver by a horizontal shaft.
What are the different parts of the pump?
The pump consists of two assemblies: 1. Casing assembly or stationary part 2. Rotating element or moving part This casing is split along the horizontal centerline of the pump shaft, suction and discharge nozzles both being located in the lower half.
What does axially split mean on a pump?
A split-case pump, properly installed, designed, and operated, can provide decades of service. Axially-Split Horizontally-Mounted Pump. Most split-case pumps are axially-split – meaning that the flange at which the pump casing separates is in the same plane as the pump axis.
What are radially-split pumps?
Radially-split pumps are also available, and are commonly used in very high-pressure and high-temperature industrial applications (boiler-feed pumps are one common application for radially-split pumps).