Table of Contents
Why does my Apple Charger keep breaking?
Pressure and tension is not good for the cable. One of the most common causes of cable breakage is due to it being squashed and heavily bent by tension or pressure. The point where the plug connector meets the cable is the most likely place for it to fray.
How do I keep my iPhone charger port from breaking?
How Do I Keep My Charger Cable from Breaking?
- Loop the Cable. Never throw the charging cable in your drawer or bag after use.
- Connect and Remove the Charger Carefully.
- Avoid Excessive Bending.
- Don’t Use Your Phone While Charging.
- Get A Reinforced Charging Cable.
How do I stop my charger cable from breaking?
You can take your time neatly wrapping the cable to reinforce it, but the best way to prevent any more damage is to wrap the split or fraying part of the cable several times with electrical tape, then work your way out from that spot. This immobilizes any breaks in the cable and helps prevent further damage.
How do you preserve a charging port?
Leave your device in a dry area for at least an hour with the charging port facing down. This will allow airflow into the port and force excess water to drip out on its own. If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.
How long is a normal iPhone charger?
The length of the Lightning Cable is the same length that comes with your iPhones. So it is 3 feet in length.
How do I stop my Macbook charger from breaking?
Taking a small piece of electrical tape, I cut the heads off the matchsticks and put them on each side of the cord. Wrap electrical tape around them as tightly as you can — the stretchiness of this kind of tape really helps.
How do you keep your charger from breaking?
Wrap a pen spring around the end of a cable wire to prevent fraying.
- This will help prevent fraying at the cable’s most delicate point while still keeping it flexible.
- Use 2 pens springs to reinforce both sensitive ends.
How do I keep my charger port from breaking?
Use cable protectors Small and usually made from rubber or silicone, these cable protectors are made to wrap around the top of your charger where the joint of the port meets the wire. This is the weakest part of most cables and is usually the first to break.
How can I Make my iPhone charger cable longer?
Get some embroidery floss, cut the floss so it’s four times longer than your charger cable. Tie the floss to the end of the cable, and braid a bracelet around the cable to make for some pretty reinforcements. Bracelet for your iPhone cable charger, genius. 7. If you don’t mind spending some extra cash, a reinforced charge cable would do the trick
Why do Apple Chargers always break and what can you do?
Why Do Apple Chargers Always Break And What Can You Do About It? 1 ● Aesthetics – it’s rumored that Apple’s design team has ultimate control since the company cares so dearly about its… 2 ● Convenience – Apple knows that its average consumer is always on the run. The materials they’ve used for their… More
How can I reinforce the cable on my Charger?
Use them to reinforce the cable! Get some embroidery floss, cut the floss so it’s four times longer than your charger cable. Tie the floss to the end of the cable, and braid a bracelet around the cable to make for some pretty reinforcements.
Is the iPhone charger cable really that bad?
The iPhone is one of the best smartphones around, there’s no doubt about that. BUT, the charger cable is far from the best. In fact, it’s terrible as it splits and breaks wayyyyyy too easily. Looks familiar? It’s almost as if these cables are made to be broken, so we have to keep buying new ones!