Can you use a motion sensor with a fluorescent light?

Can you use a motion sensor with a fluorescent light?

4 Answers. It shouldn’t be a problem, if you purchase the proper motion sensor. When shopping, make sure the sensor specifically mentions compatibility with florescent lights.

What is the difference between occupancy sensor and vacancy sensor?

An occupancy sensor turn lights ON automatically upon the detection of motion then turns the lights OFF automatically soon after an area is vacated. A vacancy sensor does not offer an option of automatically turning lighting on requiring a manual button press from the occupant (manual/vacancy mode).

How do you wire a motion sensor to an existing indoor light?

How to Add Motion Sensors to Existing Outdoor Lights

1. Pick an outdoor motion sensor kit online. First, make sure the existing light has an opening to screw into.
2. Turn the power off to the light, and remove the cover.
3. Remove the insert.
4. Run the wires into the light.
5. Connect the wires.
6. Adjust the sensitivity.

How do you bypass a motion sensor light switch?

One of the quick tricks you can try is to quickly turn the motion sensor ON, OFF, ON to override the motion detection and make the light stay on. To go back to motion detection mode, turn the motion sensor switch off and wait for about 10 seconds, and then turn it on again.

How do you wire a vacancy sensor?

1. Step 1: Turn Off Power. Turn off power at the circuit breaker for the room or outlet where you’ll be installing the sensor.
2. Step 2: Remove Switchplate. Remove existing switchplate cover with a screwdriver.
3. Step 3: Connect Sensor. Connect the occupancy sensor to the outlet, one wire at a time.
4. Step 4: Screw In Sensor.

How do you wire a motion sensor to a light fixture?

Run the wires into the fixture and screw the motion detector into your light fixture. Connect the hot wire from the house to the motion detector black, the red wire to the hot wire (black in the US) of the light, and tie the neutral wires together. Adjust the sensitivity as needed, button it all up, and call it done.

Why are my motion sensor lights not working?

The best way to reset a motion sensor light is to turn it off and back on again for a period of 30 seconds or longer. A homeowner can also turn the power to it off at the breaker, in order to ensure it has time to reset itself. If that doesn’t work, the sensor itself or the bulb may be to blame.

Where can I buy a light sensor for fluorescent lights?

When shopping, make sure the sensor specifically mentions compatibility with florescent lights. According to it’s documentation. You can pick one up at Home Depot for ~$15.00 or Amazon for $32 USD (2018). If you shop around, you can also find sensors that work with compact fluorescent lamps (CFL).

Will the Heath Zenith occupancy motion sensor work with fluorescent lights?

When shopping, make sure the sensor specifically mentions compatibility with florescent lights. The Heath Zenith Occupancy Motion Sensor Wall Switch Controls up to 500 Watts incandescent and 400 Watts fluorescent lighting According to it’s documentation.

Is it safe to use a motion sensor under fluorescent lights?

It shouldn’t be a problem, if you purchase the proper motion sensor. When shopping, make sure the sensor specifically mentions compatibility with florescent lights. According to it’s documentation. You can pick one up at Home Depot for ~$15.00 or Amazon for $32 USD (2018).

What type of sensor should I look for in a lighting system?

I would look for dual-technology sensors that takes both technologies and combines them into one sensor. Fluorescent and motion sensors are really nothing new. A lot of commercial building use them in restrooms, and some power companies offer rebates for using motion sensors for controlling aisle lighting in big warehouses.