How much space should be between faucet and soap dispenser?
The typical distance between a kitchen faucet and a sink-mounted soap dispenser is 8 inches on center — measured from the center of the hole for the faucet to the center of the hole for the dispenser. In a bathroom, the common distance between the faucet and sink-mounted soap dispenser is 4 inches on center.
How do you enlarge a hole in a granite countertop?
When enlarging an existing hole, merely choose a larger bit according to the size you need the hole to be. Center the drill bit on top of the other hole and drill down through, letting the bit eat away at the sides and carve out a larger diameter.
Can you drill into countertop?
Solid surface can only be drilled with a router, hole saw or spiral drill bit. Do not use an auger-style bit or sabre saw… it will microfracture the material which can lead to widespread cracking! The drilling is done in two steps. First, drill a locator hole through the countertop at each of the three marks.
Can you drill into laminate countertop?
Cutting and Drilling Plastic Laminate Countertops Q&A. Drilling plastic laminate is not that much different than drilling into wood. Though the surface of laminate is indeed hard and durable, it drills easily with a sharp wood drill bit.
How do you cut a sink hole in a solid surface countertop?
Cut the sink hole out of the countertop, using a jigsaw mounted with a fine-toothed down-cutting blade. A down-cutting blade’s teeth are cut so that any chipping that might occur during the cutting is on the bottom side of the material.
Which side of kitchen sink should soap dispenser go on?
Built-in soap dispensers are almost always positioned to the right of the faucet assembly unless the main users of the sink in question are left-handed.
How far apart should faucet holes be?
Typically, faucets are centered on the sink. From there, holes are drilled 4, 6, or 8 inches apart, when measured from the center of one hole to the center of the next hole. Like most design, rules are fluid and there is room for deviation.
What is the standard size hole for a kitchen faucet?
1 3/8″
Hole size = 1 3/8″or 35mm is the worldwide standard faucet hole size.