How do you remove a cartridge from a Moen faucet?

How do you remove a cartridge from a Moen faucet?

To remove the cartridge from your faucet assembly, first hold the handles steady and unscrew the handle hub counterclockwise. Once the handle hub is loosened completely, pull the handle off the valve assembly. Then, loosen and remove the nut from the cartridge using pliers.

How do I know if my Moen cartridge is bad?

Symptoms of a bad Moen 1225 and 1222B Cartridge:

1. Leaking from the handle, tub spout or shower head when off.
2. Difficult to open or close shower valve.
3. Difficult to turn shower handle.
4. Inability to get very hot or very cold water.

Why does my Moen shower faucet drip?

A leaking Moen shower faucet is usually caused by a faulty cartridge. The 2 washers which shut off the cold and hot water flow are in most cases worn out, allowing water to drip even when the faucet is turned off. Moen faucets have a lifetime warranty so all you have to do is to email/call them for a replacement.

Where is the model number on a Moen bathroom faucet?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

How many different types of Moen shower cartridges are there?

Fortunately, Moen makes this process fairly simple because, over the last 40-years, they have only made four different types of cartridge valves. These are numbered 1200, 1222, 1225, and 1255.

How do I repair a Moen bathroom faucet?

Twist the spanner cap over the old cartridge to work it free, and put the new cartridge in its place. Before reassembling the fixture, clear away any mineral deposits on the old parts using a solution of vinegar and water. Follow the above steps in reverse to put the faucet back together, and turn on the water supply.

How to replace a Moen shower cartridge?

To replace a Moen shower faucet cartridge, turn off water to the shower, remove the handle, stop tube and temperature limit stop. Remove the cartridge retaining clip and pull out the cartridge using a cartridge puller. Push in the new cartridge and put back the retaining clip, stop tube, limit stop and handle.

How to install a Moen shower valve?

Prepare Your Moen Shower Valve. Some prep work needs to be done to the Moen shower valve.

Insert The Valve Into the Wall. Since this is a rough-in,your wall should already be open.

Secure The Joints. This step is vital but can also be dangerous.

Re-Insert The Cartridge.

Install The Shower Valve Handle.

How do you use the Moen faucet repair cartridge?

Place the repair cartridge into the valve so that the ears align with the retaining clip notch. Place the washer over the cartridge, and reinstall the retaining clip. Then replace the handle of the faucet, and tighten the screws.