How do I fix Seagate External Hard Drive not detected?

How do I fix Seagate External Hard Drive not detected?

Basic hardware troubleshooting steps:

1. Try connecting the drive to a different port on the computer.
2. If possible, try using a different cable.
3. Try using the drive on a different computer.
4. Verify the drive light is on.
5. Try a different power outlet.

Why wont my computer recognize my external hard drive anymore?

Try Another USB Port (or Another PC) If the drive still isn’t working, unplug it and try a different USB port. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead. You might also try it in another computer.

What happens if you drop your external hard drive?

External hard drives, also known as portable hard drives, have physical moving parts. Dropping an external drive or hitting, or bumping it leads to the external hard drive failing. A jolt or drop can result in the liquid bearing seizing or more commonly the read/write heads suffer physical damage.

How do I reset my Seagate Backup Plus portable drive?

Reset using the button

1. Power down the Seagate Central by unplugging it from power.
2. Wait approximately 15 seconds.
3. Power up the Seagate Central again.
4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes.
5. Wait until the light becomes solidly illuminated.

How do I open a Seagate external hard drive?

Starts here3:17Open / Dismantle the Seagate Expansion Desktop Drive to use as …YouTube

Is it OK to drop a hard drive?

Never power up a dropped hard drive When a hard drive (or a device housing one) is dropped, various components can move or suffer damage. In either case, it’s a serious problem that will only worsen should you attempt to operate the drive.

Where is the reset button on Seagate external hard drive?

On the bottom of the Seagate Central device, there is a RESET button. Using a paperclip or a ballpoint pen, hold down the button for approximately 10-15 seconds until the light on the top of the Central flashes. Wait until the light becomes solidly illuminated.

How do you fix a dropped computer?

How to Fix a Dropped Laptop

1. Examine the case (your laptop’s exterior casing, not the carrying case.)
2. Take a look at your laptop’s screen and check if it is cracked or damaged.
3. Plug in your laptop and try to boot up the system.
4. Check with your laptop’s manufacturer if you hear unfamiliar beeping.