Why can I see my wifi network but not connect?

Why can I see my wifi network but not connect?

Make sure your computer/device is still in the range of your router/modem. Move it closer if it is currently too far away. Go to Advanced > Wireless > Wireless Settings, and check the wireless settings. Double check your Wireless Network Name and SSID is not hided.

Why won’t my Blu Ray player connect to WIFI?

Power reset your modem/router Unplug the power cable to your modem/router and wait about 60 seconds. Reconnect the power cable to your modem/router and make sure it’s turned on. Wait until the device is finished making it’s connection to the internet and your network. Check if the issue is resolved.

Why are some of my devices not connecting to WIFI?

Make sure airplane and offline mode are deactivated on your device. If airplane mode or offline mode is activated, your device will not connect to any Wi-Fi networks, nor will it connect via Bluetooth.

How do I connect my Blu-ray player to my wireless network?

To connect your Blu-ray player to your WiFi network:

1. Make sure your Blu-ray player and TV are powered on and that your WiFi network is working properly.
2. Navigate to your Blu-ray player’s main menu screen.
3. Open Network Settings and then select WiFi Setup.
4. Select Wireless as your connection type.

How do I change my Blu-ray player from wired to wireless?

Changing the network settings of the Blu-ray Disc player

1. On the supplied remote control, press the HOME button.
2. Select Setup.
3. Select Network Settings.
4. Select Internet Settings. For wired connection. Select Wired Setup. Select Manual. For wireless connection. Select Wireless Setup.
5. Follow the on-screen instructions.

Can’t connect to WiFi even with correct password Android?

I’ve entered the correct password, but I still can’t connect

1. Double-check that you have the correct password.
2. Try the hex or ASCII pass key.
3. Try turning your wireless card off and then on again.
4. Check that you’re using the correct type of wireless security.
5. Check that your wireless card is properly supported.

Why can’t I connect to my Wi-Fi but others can?

The first thing you should try is testing the wireless network without the computer/laptop. Try any device that uses WiFi such as a smartphone or tablet. If that other device can access your WiFi, the problem is with your laptop. If it is an older laptop/device it may not support the latest wireless encryption (WPA2).

How do I allow devices to connect to my Wi-Fi?

General steps:

1. Find your device’s wireless settings menu and select “Enable” or “On” to turn WiFi on.
2. Select your network (SSID) from the list, then enter the network key/passphrase when prompted and select “Connect” or “Join.”