Table of Contents
- 1 How do anti-personnel mines work?
- 2 What mines were used in the Vietnam War?
- 3 What does an anti-personnel mine weigh?
- 4 What does antipersonnel mean?
- 5 Where are the mines in Vietnam?
- 6 How close can you be to the back of a Claymore?
- 7 How much TNT is in an anti-personnel mine?
- 8 Did the British use metal detectors in WW1?
How do anti-personnel mines work?
Anti-personnel Mines Anti-personnel landmines are designed specifically to reroute or push back foot soldiers from a given geographic area. These mines can kill or disable their victims, and are activated by pressure, tripwire or remote detonation.
What mines were used in the Vietnam War?
The M14 mine blast-type anti-personnel mine used by the United States during the Vietnam War was known as the “toe popper.” Earlier examples of the toe-popper were the Soviet-made PMK-40 and the World War II “ointment box.” The United States also used the M16 mine, a copy of the German “Bouncing Betty”.
Can you survive landmine?
There is little you can do to survive a land mine. They explode WHEN they are stepped on. Mines in WWII were designed to KILL. Today mines are still designed to do that but there are also mines designed to injure (toe poppers).
What does an anti-personnel mine weigh?
A standard antitank mine contains about 5 kg of explosives and weighs about 9 kg in all.
What does antipersonnel mean?
Definition of antipersonnel : designed for use against military personnel an antipersonnel mine.
Did the Viet Cong use mines?
The Viet Cong did not use the M16 mines in the conventional form. Instead, the VC planted mines in villages, likely helicopter landing zones and approaches to their jungle bases. As VC units were dislodged from camps and villages, their mines remained in the ground, unmarked.
Where are the mines in Vietnam?
Somewhere in the centre of Vietnam, roughly halfway between Hanoi and Saigon, lies the small province of Quang Tri.
How close can you be to the back of a Claymore?
The forward danger radius for friendly forces is 250 meters. The backblast area is unsafe in unprotected areas 16 meters to the rear and sides of the munition. Friendly personnel within 100 meters to the rear and sides of the munition should be in a covered position to be safe from secondary missiles.
What is an anti-personnel mine and how are they used?
Anti-personnel mine. Anti-personnel mines are used in a similar manner to anti-tank mines, in static “mine fields” along national borders or in defense of strategic positions as described in greater detail in the land mine article. What makes them different from most anti-tank mines, however, is their smaller size,…
How much TNT is in an anti-personnel mine?
On a US M14 mine, 29 grams of tetryl is used, while 240 grams of TNT is used in a Russian PMN mine . Anti-personnel blast mines are the most common type and are typically deployed on the surface (hidden by leaves or rocks) or buried under soil at a depth of 10 – 15 cm.
Did the British use metal detectors in WW1?
However, by the middle of the conflict, the British Army was using the first, practical, portable metal detector—the Polish mine detector. The Germans responded with mines that had a wooden or glass casing to make detection harder.
What is the purpose of using mines in war?
The mines are often designed to injure, not kill, their victims in order to increase the logistical (mostly medical) support required by enemy forces that encounter them. Some types of anti-personnel mines can also damage the tracks on armoured vehicles or the tires of wheeled vehicles.