Table of Contents
How do I know what kind of bathtub faucet I have?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
Where do I find my faucet model number?
Identifying Your Faucet Model
- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
How do I know what cartridge my faucet is?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
What faucet brand has a red and blue circle?
Delta faucet
The Delta faucet has a red/blue button.
What are the different types of bathtub faucets?
Types of Bathtub Faucets:
- Wall-Mount Faucet.
- Deck Mount Bathtub Faucet.
- Roman Bathtub Faucet.
- Freestanding Bathtub Faucet.
How do you replace a tub faucet with no wall access?
How to Replace Tub Faucets With No Wall Access
- Turn off the water valves at the main incoming water pipe.
- Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench.
- Pry out the clip around the cartridge with a pair of needle-nose pliers.
- Install a new cartridge inside the faucet head.
How do I identify my tub shower valve brand?
If you want to know how to identify the shower valve manufacturer, check behind the shower handle at the center of the trim plate for the manufacturer’s symbol or brand name. You will see one of the following shower faucet logos: K: the manufacturer is Kohler. M: the manufacturer is Moen.
How do I identify my faucet manufacturer?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
What is the Moen logo?
The Moen logo has been specially created for our brand. It features the waterdrop symbol, the Moen wordmark and our long-established tagline. The full-color logo is always preferred and should be used whenever possible.
How do you replace the parts of a faucet?
You most likely will be able to obtain the correct replacements parts by first removing the faucet stem and count the number of splines on its broach. Also, measure the length of the stem from top to bottom.
What are the different parts of a bathtub?
Here’s a detailed diagram illustrating the different parts of a bathtub including the pipes, faucet, spout, tub attributes, shutoff valves, drain pipe and more. Installing a bathtub isn’t the easiest DIY task. It helps, though, if you understand the various parts of a bathtub.
How do you replace a broken broach on a faucet?
You most likely will be able to obtain the correct replacements parts by first removing the faucet stem and count the number of splines on its broach. Also, measure the length of the stem from top to bottom. The broach is atop the faucet stem, resembling a shape of a small-toothed gear.
How do you remove a stripped bathtub faucet handle?
Wiggle the handle and pull it off. You may need a faucet handle puller if the handle will not come off by hand. Place a socket wrench over the bathtub faucet stem until it covers the hex nut. Turn the wrench counterclockwise to loosen the nut until you can pull the stem free. Repeat the steps if you have a two-handle system.