Table of Contents
- 1 Why are some records louder than others?
- 2 Why does my vinyl not sound right?
- 3 Why are some vinyl quieter than others?
- 4 Why are some records so quiet?
- 5 Is new vinyl as good as old vinyl?
- 6 What sounds better CD or vinyl?
- 7 Do some vinyl records sound better than others?
- 8 Do you have silent replay with your vinyls?
Why are some records louder than others?
It has a lot to do when the disc is cut. If there is any variation in the way the disc was cut, the volume can vary. While most manufacturer try to maintain a standard, a slight variation can result in a different in the volume. Since the way that a disc is cut varies from label to label, variations in volume occur.
Why does my vinyl not sound right?
Vinyl can sound bad for all sorts of reasons, chief among which: The record is damaged. The turntable is cheap and nasty. The tonearm is incorrectly calibrated – correct balance, tracking force and anti-skate forces are critical to clean playback and to avoid damage to records.
Do vinyls sound better over time?
Absolutely – vinyl wins this one hands down. Not just the wear and tear of vinyl that will degrade playback quality over time, but the physical limitations. For example, a longer album will require slimmer grooves, creating a quieter sound and more noise as the needle moves through them.
Do original vinyl pressings sound better?
Specifically, “Are the first versions of an album more valuable?” And, “Do first pressings sound better?” The answer to the first question is yes. First pressings of a vinyl record are generally more desirable. They’re seen as more “authentic,” and so vinyl lovers will generally pay more for that first edition.
Why are some vinyl quieter than others?
It really is that simple. Better musicians, using better microphones, recorded by better engineers, transferred to vinyl by a better manufacturing plant yields a better sounding record. Recording quality varies wildly regardless of the medium on which it’s distributed.
Why are some records so quiet?
Record players are quiet by nature. They produce an extremely low electrical signal that needs to be amplified two times. It first gets amplified by a preamp (either internal or external) which brings it up to the same line level as a CD player. Then it must be amplified again to be audible from your speakers.
Why does my vinyl sound scratchy?
Dirt and static electricity may cause good records to sound “scratchy”. An old or worn stylus will cause your records to sound bad or sound scratchy. This is because a worn stylus is getting down to the bottom of the record groove where there is no music.
How can I make my vinyl sound better?
- Keep your records dust-free. When you order your turntable from Crutchfield, order a good record brush, too.
- Add a cushy record mat.
- Reduce unwanted vibrations.
- Check your cables.
- Give your records a deep cleaning.
- Upgrade your cartridge.
- Improve your platter.
- Invest in a high-quality phono preamp.
Is new vinyl as good as old vinyl?
Re: New Vinyl vs Old Vinyl The original 70s, 80s and early 90s releases are much better than the new pre-presses. There is a huge difference in sound volume and quality. There are fairly good new ones also but not as good as the old ones. Some new releases and re-presses have crackles, IGD etc.
What sounds better CD or vinyl?
Sound Quality From a technical standpoint, digital CD audio quality is clearly superior to vinyl. CDs have a better signal-to-noise ratio (i.e. there is less interference from hissing, turntable rumble, etc.), better stereo channel separation, and have no variation in playback speed.
How can I improve the sound quality of my vinyl?
How can I make my record player sound better?
Do some vinyl records sound better than others?
Vinyl definitely is trendy, though. That’s why mall stores like Urban Outfitters now sell turntables and display racks of vinyl records. That said, some records do sound better than others, especially ones that are clean and in good condition (little or no scratches or surface scuffs).
Do you have silent replay with your vinyls?
With new records I pretty much have silent replay with my vinyl. Even records from poor pressing plants such as United Record Pressing in Nashville, TN., the noise on these records is reduced considerably such as to be inaudible during the music and much reduced between tracks. Visit my website, www.vinyllpcare.com for further tips.
Why do my vinyl records sound weird and distorted?
Maybe it’s SUPPOSED to sound “weird and distorted”: , 50 years diverse musical involvement. Especially guitar and singing. To get a good sound from vinyl, you need a good turntable, a good tonearm tracking at the right pressure for the stylus, a good stylus in good condition, and your records need to be clean.
Should I wet clean my new vinyl records before playing?
In fact, as a matter of good practice, I wet clean all my new vinyl before the first play. In many cases, new records come contaminated straight from the factory and usually benefit from a light clean. If wet cleaning doesn’t clear things up, you could have a bad pressing.